Basic precautions for dismantling hardware fittings

As a novice, the matters needing attention when disassembling screw machine accessories are as follows:

In front of the bearing, we must pay attention to the mechanical seal and related seal. At this time, we must lift the rotor slightly, so as to avoid the phenomenon of pulling the screw machine accessories.

Second, in addition, after the removal of the radial bearing, it is not allowed to rotate the rotor, which is easy to cause damage to the screw machine accessories and equipment performance.

Third, before replacement and maintenance, the corresponding accessories and tools must be prepared, so that the operation process will be more smooth.

Fourth, when dismantling different screw machine accessories, operators must pay attention to the grasp of strength, not too heavy or too light.

Fifthly, when disassembling different sealing parts and lifting rotors, special care must be taken to avoid knocking or collision, otherwise it is easy to damage the parts.

Sixth, the removed parts must be properly placed, so that they will not be missing because they are not properly kept.

Seventh, prepare tools that meet the requirements, and carefully understand the basic precautions in the disassembly process. Before operation, check whether the tools can meet the requirements of the disassembly personnel.

Eighth, Du Yu complete set of screw machine accessories, such as radial bearings, sealing components, etc., must be placed in sets, not scattered management. The matching accessories need to be marked with corresponding marks, so as to avoid mistakes in storage, disassembly and installation.

Ninth, establish a perfect screw machine parts maintenance system, and pay attention to the disassembly of the operation, the staff for each link, need to be careful.